Millennium T-360, Инструкция по эксплуатации

Страница: 11 / 18

4282019
11
STEP 9: From this point on you will need two (2) other people to help you with the assembly. The stand will be assembled on its side.
Lay the ladder section flat on the ground and attach the front of the platform to it first using one (1) 5/16 x 2-1/2” bolt, two (2) washers
and one (1) nut placing washers under head of bolt and nut as shown in Figure 25. Snug the nut, do not tighten at this time. NOTE: The
front half of the platform has only one leg attachment bracket.
Figure 25
Lay Tripod On Its Side
STEP 10: Attach the other two (2) legs to the platform in the same manner as the ladder with the ladder still laying on the ground. Be
careful not to bend the mounting brackets on the platform.
STEP 11: With all three (3) legs attached you can now attach the other end of the cross braces to the top of the legs using one (1) 1/4”x
2” bolts, two (2) washers and one (1) nut as shown in Figure 27. Have one person lift one of the legs while another person attaches the
cross brace to the top brace mount on the corresponding leg. Repeat this process until all the cross braces are installed.
Figure 27
Attach Cross Braces
Figure 26
Attach Remaining Legs