background image

2

HV-3D

SAFETY PRECAUTIONS

For your safety and the safety of others, be sure to read and understand all safety and opera-

tional instructions before attempting to use the HV-3D. 

WARNING: The HV-3D internal

circuitry carries lethal voltages.

 Carefully observe all warnings, precautions, and instructions

on the HV-3D and as described in the instructions supplied with the unit.

1. WATER, MOISTURE, AND SPILLAGE

Do not attempt to use the HV-3D in, near, or around water or in unusually moist environments,

such as near a sink or swimming pool. Prevent liquids or any other materials or objects from

spilling or falling into the HV-3D unit.

2. HEAT AND VENTILATION

Be sure to allow adequate ventilation to HV-3D and avoid using or installing unit in close proxim-

ity to heat sources, such as heaters, stoves, radiators, power amplifiers, spotlights, or other heat-

producing appliances or equipment.

3. POWER SOURCES AND POWER CORD PROTECTION

The HV-3D Power Supply should be connected to a power source only of the type described in

the operating instructions or as marked on the Power Supply. Route the power cord so that it is

not likely to be walked on or pinched by having objects placed on it. Pay particular attention to

plugs, receptacles, and the point where the AC power cord exits the HV-3D.

4. GROUNDING

For your safety, it is extremely important that the grounding pin of the 3-wire power cable (in-

cluded with unit) be inserted into a grounding type 3-pin power outlet. If you are unable to insert

the plug into an existing outlet, contact an electrician to install a properly grounded 3-pin power

outlet, preferably that with OFI protection, if available.

5. DAMAGE REQUIRING SERVICE

This unit should be repaired or serviced by qualified personnel whenever:

· The AC power cord has been damaged, or

· A 130 Volt DC microphone cable has been damaged, or

· Objects have fallen or liquid has spilled into any HV-3D unit, or

· The unit does not function properly or exhibits a marked change in performance, or

· The unit has been abused, dropped, or damaged, or

· The unit has been exposed to rain or moisture

6. SERVICING

Lethal voltages are found inside the HV-3D chassis.

 The user should not attempt to repair or

service this unit. All servicing and/or repairs should be referred to Millennia Media.

If, after reading all instructions, precautions, and warnings, you have remaining questions, please

contact Millennia Media directly before attempting to use your HV-3D. Retain this owner’s

manual as a record of your purchase to aid positive identification in the event of loss.

Содержание HV-3D












Отзывы: