background image

11

HV-3D

WARRANTY

Millennia Media will repair this product, free of charge, in the USA, in the event of defect of

materials or workmanship for one (1) year following date of purchase. This warranty is extended

only to the original purchaser. This limited warranty covers failures due only to defects in materials

and workmanship which occur during normal, intended use and does not cover damage which

occurs in shipment or failures which are caused by products not supplied by Millennia Media. This

limited warranty does not cover failures which arise from accident, misuse, abuse, neglect, mishan-

dling, misapplication, faulty installation, improper adjustment, alteration or modification of

product, incompatibilities, line-power surges, acts of God, or service performed by anyone other

than Millennia Media or its authorized agent. Vacuum tube failures are not covered under war-

ranty.

LIMITS AND EXCLUSIONS

There are no express warranties except as listed above. Millennia Media shall not be liable for

special, subsequent, incidental, consequential, or punitive damages, including, but not limited to:

damage to recordings, microphones, mixing consoles, or any associated equipment, downtime

costs, loss of goodwill, or claims of any party dealing with purchaser for such damages resulting

from the use of this product. All warranties, express and implied, including the warranties of

merchantability and fitness for a particular purpose are limited to the applicable warranty period

set forth above.

Some states do not allow the exclusion or limitation of incidental or consequential damages, or

length of time an implied warranty remains in effect. As such, the above exclusions may not apply.

This warranty gives you specific legal rights and you may also have other rights which can vary

from state to state.

MUSIC & MEDIA SYSTEMS

Millennia Media, Inc.

4200-B Day Spring Court

Placerville, CA 95667-9500

T 530-647-0750

F 530-647-9921

[email protected]

http://www.mil-media.com

The HV-3D is hand-crafted in USA

Manual printed in USA

Содержание HV-3D












Отзывы: