3262019
10
SAFE LINK CLIMBING ROPE SYSTEM COMPONENTS
A Safe Link climbing rope system has been included with this product(s) for your use. Please note it is
included for your optional use; its use is not mandatory. It is designed to compliment lock-on, fixed position,
and ladderstands. It is designed to ensure you are safely connected at all times while ascending (climbing
up) and descending (climbing down) trees. Your Safe Link climbing rope system has several components: 1) climbing rope; 2) prusik hitch
(six loops and prusik loop); and 3) carabiner as shown in Figure A. For safe operation, the prusik hitch MUST be configured as shown
below in Figure A. If it is not, configured as such DO NOT USE, REMOVE FROM SERVICE!
1
3
2
4
5
6
WARNING!
PRUSIK HITCH MUST BE CONFIGURED AS SHOWN!
3” Tail Minimum
Knot Secure
The prusik hitch MUST:
1) Have six (6) loops; 2) Have secure knot; 3)
Have 3” tail beyond knot end; and 4) Lock to the
climbing rope when pulled on.
If not configured in this manner, and if it does not
lock to the climbing rope--DO NOT USE!
Remove from service and call (601) 932-5832 for
replacement instructions.
WARNING! This Safe Link is designed to accommodate ONE (1) climber (user/person). Under no circumstances shall more
than one (1) user attempt to use this product. Failure to follow these instructions may result in serious injury or death!
WARNING! The prusik hitch must be configured as shown in Figure A. If it is not, DO NOT use! Failure to follow these
instructions will result in serious injury or death!
WARNING! This Safe Link climbing rope system and its components has been designed to be used only as a safety device
for hunting from elevated treestands. Any other use is prohibited (i.e., towing vehicles, hoisting, lifting, load restraint, etc.).
Failure to follow these instructions may result in serious injury or death!
WARNING! You MUST read all the “Warnings!” in this Instruction Manual prior to attempting to use this product(s). Failure
to follow these instructions may result in serious injury or death!
WARNING! DO NOT hold or grab the prusik hitch should you experience a fall. This may cause the prusik hitch to release
its hold on the climbing rope, causing it to slip and you to fall further. Failure to follow these instructions may result in
serious injury or death!
Six (6) loops
Climbing Rope
Carabiner
STEP 1: Don (put on) your full-body fall arrest harness and lineman style belt which meets or exceeds industry standards recognized by
TMA as outlined in its Instruction Manual.
STEP 2: Install/set-up your ladderstand, fixed position or lock-on treestand in strict accordance with its Instruction Manual and those
provided with the full-body fall arrest harness Instruction Manual.
SAFE LINK CLIMBING ROPE SYSTEM INSTALLATION
Prusik Loop
Figure A
Figure E
Carabiner Closed and
Locked
Figure B
Wrap Rope Around Tree
Trunk
Figure D
Prusik Hitch on Loose
End Side of Climbing
Rope
Figure C
Slip Knot End Through
Loop
Model Number: Safe Link Climbing Rope System
Maximum Weight Capacity: 300 pounds (136kg)
(One (1) User and Equipment)
DO NOT WASH THIS PRODUCT IN A WASHING MACHINE!
