6
EN
WARNING!
BE SURE THE FOOT IS FITTED CORRECTLY AND ACCORDING TO THE
INSTRUCTIONS BEFORE USING THE HEATER!
Instructions
If the temperature sensor is not functioning properly, you will see this symbol
on the display. Please contact the dealer or importer.
A
B
1. Power indicator – shows whether the
heater is using power or not
2. Indicates whether the fan is activated
3. WiFi indicator
4. Desired room temperature
5. Thermostat and WiFi button
1. Thermostat and WiFi button
2. Fan ON/OFF
3. ON/OFF button
Control panel
1. Plug the heater into a grounded outlet.
2. Press the ON/OFF button.
3. Turn the thermostat to the desired temperature while looking at the display. As soon
as the room temperature drops below this level, the heater will automatically start
again. When the room has reached the desired temperature again, the heater will
turn itself off.
4. The thermostat goes from 5 to 35°C.
5. If you want to change the temperature in the room, repeat step 3.
6. Press the fan button to start the fan.
Note that the fan is only active when the
heater is heating up
(when the power indicator is on).
7. The heater has an overheat protection that turns the device off if any parts
become extremely hot.
8. If the temperature sensor is not functioning as it should, will be shown on
the display. In such instances, the heater will switch itself off. Please contact your
distributor or importer.
9. To turn off the heater, press the ON/OFF button. Should the heater be left unused
for a longer period, pull out the plug.
Usage without WiFi connection
ATTENTION!
Please be aware that when using the fan the temperature showing in the
app will be higher than the actual temperature in the room.
See figure 6 on separate illustration sheet
6
EN
