
While in open window mode, it will maintain 5°C (to avoid frost damage).
The heater will automatically start heating again if temperature increase by at least
3 degrees within 15 minutes.
You can switch the heater back to normal mode by pressing the settings button 1 time.
Open window function can be disabled/enabled by pressing and holding the settings
button for 3 seconds. You can also disable/enable open windows function from the app
if configured to WiFi.
The heater will stay in open window mode for maximum 1 hour, it then will go back
to normal heating mode.
6
EN
WARNING!
BE SURE THE FOOT IS FITTED CORRECTLY AND ACCORDING TO
THE INSTRUCTIONS BEFORE USING THE HEATER!
1. Plug the heater into a grounded outlet.
2. Press the ON/OFF button.
3. Turn the thermostat to the desired temperature while looking at the display. As soon
as the room temperature drops below this level, the heater will automatically start
4. The thermostat goes from 5 to 35°C.
5. If you want to change the temperature in the room, repeat step 3.
6.
7.
Usage without WiFi connection
again. When the room has reached the desired temperature again, the heater will
turn itself off.
The heater has an overheat protection that turns the device off in any parts
become extremely hot.
To turn off the heater, press the ON/Off button. Should the heater be left unused
for a longer period, pull out the plug.
Instructions
A
B
1. Power indicator – shows whether the
heater is using power or not
1. Thermostat and WiFi button
2. Settings button
3. ON/OFF button
Control panel
3. WiFi indicator
2. ON/OFF indicator
4. Desired room temperature
5. Thermostat and WiFi button
Child lock
You can enable/disable child lock from the app. But in addition, you can also
enable/disable child lock from the heater itself. Turn off the heater using the main
power switch. Turn the heater back on, within 5 seconds press the and hold .