1. Ensure these holes are
aligned the same way
2. Slide the inner
tube through the
outer tube
3. At this position you
may have to jiggle the
inner tube for it to
easily pass through
this insert
4. Continue sliding
the inner tube
through the outer
tube
5. At the point when you first feel resistance
to the movement of the inner tube, SLOWLY
continue to extend the inner tube until you
hear one click. This is the locked position.
To unlock - continue pulling the inner tube
outwards until you hear another click - this
is the unlocked position.
NOTE
You must extend the inner tube slowly to set it to the locked position. If you pull the inner tube out too
quickly it will go straight through to the unlocked position.
HOW TO ASSEMBLE THE TELESCOPIC STRUT
INNER
TUBE
OUTER
TUBE
2.4
Figure 3
