4K HDBaseT 4x4 Matrix Switcher
12
Note:
With this IR remote, MPM-44-IR-N can be controlled by the built-in IR, the
extended IR receiver connected to the
“IR EYE”/”IR ALL IN” and the IR receiver on the
far-end receiver.
4.2.2 Force Carrier
a)
Only if the IR receiver connected to HDBaseT receiver is with IR carrier, can the
received IR signal be transferred to IR OUT port of the matrix.
b)
Only if the IR receiver connected to
IR
ALL IN
port of the matrix is with IR carrier,
can the received IR signal be transferred to IR OUT port of the matrix.
If the IR receiver connected with HDBaseT receiver or IR ALL IN port of the matrix is
not with IR carrier, send the command
“%0901.” to enter infrared carrier enforcing
mode, and then IR signal can be transferred to IR OUT port.
4.2.3 Control Far-end Device locally
Connect an IR receiver to IR IN/ IR ALL IN on the switcher, and use the IR Remote of
far-end device to control the device locally.
1 to 1: (through IR IN)
Connect an IR receiver with IR carrier to the IR IN port of MPM-44-IR-N, users can
control far-end output displayer via its IR remote from local.
In that case, the IR signal is transferred via twisted pair. Only the corresponding IR OUT
port can emit control signals to the remote display.
See the figure below:
Control far-end device from Local
Note: The IR receiver connected to
IR IN
must be with IR carrier
PoC
DVD
HDTV
IR Remote
HDTV
IR Emitter
MPTP-T70R
