Milestone pro MP-SC-5TDS Скачать руководство пользователя

Страница: 12 / 48

Compact Scaler Switcher (with PoH)

DisplayPort cable and DP audio input port with audio cable.

Step3.

Connect a VGA source device (e.g. Laptop) to VGA input port with VGA cable
and VGA audio input port with audio cable.

Step4.

Select MIC level and connect right microphone to MIC input port. MIC audio will
be transmitted to AUDIO OUTPUT port and mixed with source audio.

Step5.

Connect a HDMI display device to HDMI output port with HDMI cable.

Step6.

Connect HDBaseT Receiver to HDBT output port with twisted pair.

Step7.

Connect speaker, headphone or AV amplifier to AUDIO OUTPUT port.

Step8.

Connect control device (e.g. PC) to the TCP/IP port, MP-SC-5TDS can be
controlled via web-based GUI.

Step9.

Connect control device (e.g. PC) to the RS232 port of MP-SC-5TDS or the
HDBaseT Receiver (bi-directional RS232 control, either end is available).

Step10.

Connect IR receiver to the IR EYE port, MP-SC-5TDS can be control via IR

remote. For more details, please refer to

4.2.IR Control

Step11.

Both the MP-SC-5TDS and the HDBaseT Receiver have IR IN and OUT.

When one model is connected with IR receiver, the other model should connect
with an IR transmitter.

For example

: When “IR IN” of MP-SC-5TDS connects with an IR receiver, the IR

transmitter must connect to IR OUT of HDBaseT Receiver.

The IR signal can be transmitted bi-directionally between the MP-SC-5TDS
and the HDBaseT Receiver.

Step12.

Connect DC24V power adaptor to the power port (HDBaseT Receiver can be

Note:

If the power adapter is connecting with HDBaseT Receiver, the MP-SC-5TDS

can’t be powered from HDBaseT Receiver.

3.4 Connection of Microphone

MP-SC-5TDS provides with one 3-level microphone input port, to accommodate different
microphone input modes, including 48V phantom power mode, MIC mode & LINE mode.



48V phantom power Mode

48V phantom power input has a good frequency characteristic, high input impedance
and high sensitivity.

When switching

to “48V”, the MIC input will provide a 48V phantom power. This is only

used for

condenser microphone

Connect the microphone in this way

: “+” connects to positive, “-” connects to negative

and “

” to ground.

Содержание MP-SC-5TDS
















































Результаты поиска

Содержание MP-SC-5TDS

Отзывы:

Похожие инструкции для MP-SC-5TDS

Бренды по названию

Популярные бренды

Milestone pro MP-SC-5TDS, Руководство пользователя

Результаты поиска

Содержание MP-SC-5TDS

Отзывы:

Похожие инструкции для MP-SC-5TDS

Бренды по названию

Популярные бренды