6
3. Attach the smartphone with NFC area to the device to read the basic information.
4. Basic information and settings of devices will be shown on ToolBox if it’s recognized
successfully. You can switch on/off the device by tapping the button on the Device Status. In
order to protect the security of devices, password validation is required when configuring via
unused phone. Default password is
123456
.
5. Tap “Read” button to check current status and sensor data of device.
6. Tap “Write” button to write all your settings to the device.
Note:
1) Ensure the location of smartphone NFC area and it’s recommended to take off phone case.
2) If the smartphone fails to read/write configurations via NFC, keep the phone away and back
to try again.
3) EM310-UDL can also be configured by dedicated NFC reader provided by Milesight IoT or you
can configure it via TTL interface inside the device.
3.2 LoRaWAN Settings
LoRaWAN settings is used for configuring the transmission parameters in LoRaWAN
®
network.
Basic LoRaWAN Settings:
Go to
Device -> Setting -> LoRaWAN Settings
of ToolBox App to configure join type, App EUI,
App Key and other information. You can also keep all settings by default.
