59
Frame-counter
downlink from the network server. It will be incremented by the
network server.
Users can reset the a personalized end-device manually, then the
frame counters on the end-device and the frame counters on the
network server for that end-device will be reset to 0.
Step3: After saving the configuration, the sensor is added successfully. It will list all
the devices that have been added, as shown in the device list below, you can check
the connection status and basic information of the device.
Step4: You can also click “Bulk Import” if you want to add many sensors all at once.
Click “Template Download” to download template file and add device information to
this file. Application and device profile should be the same as you created on web
page.
