9
Step4: After login, please select “Settings”
→
“Network”
→
“Basic”
→
“TCP/IP”. The
Network Settings page appears (Shown as below Figure);
Step5: Change the IP address or other network values. Then click “Save” button;
Step6: The change of default IP address is completed.
2.1.4 LPR Settings
Notes
Here only introduce the configuration related to this solution,
for more camera
configuration, please refer to
Milesight Network Camera User Manual
(1) General
Step1: After log in the web, go to “LPR “
→
“Settings“
→
“General”.
Check the checkbox “Enable LPR”, you can draw the screen to select area interested.
