28
A patrol is a memorized series of preset function. It can be configured and called on the patrol
setting list. You can customize up to 8 patrols and it can be configured with 48 presets. Before
configuring the patrol, you should make sure that the presets you want to add to the patrol have
been defined.
Set a patrol:
Step1: In the PTZ control panel, click
to enter the patrol settings interface;
Step2: Select a patrol number, the setting icon will appear
, click it;
Step3: Click
to add presets to this patrol, as shown below;
Step4: Configure the preset number, patrol speed and patrol time;
Table 4-1-3 Description of Patrol Settings
Name
Description
Patrol Speed
The speed of moving from one preset to another.
Patrol Time
The duration staying on one patrol point.
Step5: Click
to save the patrol settings.
Note:
A. Patrol Speed only works in Patrol mode.
B. Patrol Time should be 0~120s.
Call a patrol:
In the PTZ control panel, select a defined patrol from the patrol list, and click
to call the patrol,
as shown below.
Содержание MS-C2964-PB
