Miles Technology Multisonic M44, Руководство по эксплуатации

Страница: 15 / 33

2 The Multisonic Imager
11
Specifications
Front Panel Controls
Stereo Input/Image:
Level, C/S Image Balance, Surround
5.1 Input:
Level, 5.1-to-Multisonic switch
Discrete Sub Input:
Low-Pass Filter switch
Output Levels:
Subwoofer Level, Center Level, Left/Right
Level, Surround Level
Output Switches:
L/C/R Output High-Pass Filter, LC and CR
Setup.
Front Panel Indicators
Signal Present (green) and Clip (red) for each of:
Subwoofer, Center, Left/Right, and Surround
Outputs
Setup Function (yellow)
Power On (blue)
Inputs
Stereo Left and Right, Discrete Center and Discrete
Subwoofer:
XLR connectors; balanced/differential inputs;
+22 dBu maximum input level; 22,000 ohms
input impedance.
Stereo Left and Right (unbalanced):
Gold RCA phono-type connectors for three
stereo input connections; +11 dBu maximum
input level, 8,500 ohms input impedance.
5.1 Input (M86 only):
Gold RCA connectors for left, center, right,
subwoofer, left surround, and right surround;
+11 dBu maximum input level, 8,500 ohms
input impedance.
Outputs
Left, Center, Right, and Subwoofer:
XLR connectors; balanced, +26 dBu maximum
output into 1200 ohms, 100 ohms differential
output impedance.
Left Surround, Right Surround (M86 only):
XLR connectors; balanced, +26 dBu maximum
output into 1200 ohms, 100 ohms differential
output impedance.
Subwoofer Crossover Filters
Fourth-order Linkwitz-Riley filters.
Crossover Frequency: 95 Hz
Signal Path
Frequency Response, any input to any output
(except crossover filter paths):
20 Hz to 20 kHz ±1 dB.
Total Harmonic Distortion:
At max. output: < 0.03%, 20 Hz - 20 kHz.
Typical: 0.005%, 20 Hz - 20 kHz.
Output Noise, 20 Hz to 20 kHz:
< -84 dBu symmetrical, < -90 dBu
unsymmetrical.
Power Source
Ac line voltage:
120 or 240 Vac, selectable with internal
jumpers.
Power consumption:
10W max.
Grounding:
Grounding ac plug; grounded chassis.
Dimensions
1U rack space.
19" x 1.75" x 10.5"
(48.3 cm x 4.45 cm x 26.7 cm)
Shipping Weight
15 lbs. (6.8 kg)
Note: 0 dBu = 0.775 Vrms
Block Diagram
The block diagram of the M86 is shown in Figure 7,
and the block diagram for the M44 is shown in
Figure 8. This shows the internal signal path routing
and helps to illustrate its design and signal-
processing capabilities for various audio
applications.