12
Control Box Installation Cont’d
2-9: Mount Control Box on the Tie Bars.
2-10: Locate the extra pieces for the Tie Bar Mountin Brackets.
2-11: Screw in pieces to the rear of the Brackets.
2-8: Install the mounting bracket to the bottom of the control box with a 10mm
wrench.
Mounting Control Box on Tiebars
1. Mount the control box to mounting brackets using 10 mm
wrench (Fig 2-8).
2. Mount control box on the tie bars by attaching front end first
and pushing down to snap in the back end (Fig. 2-9).
3. Locate the two extra pieces for the tie bars mounting brackets
(Fig. 2-10).
4. Screw in these pieces to the rear side of the tie bar bracket
using a Philips Head Screw Driver (Fig. 2-11).
