MiLAN MIL-SME801GLX Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 155

background image

Regulatory Approval
- FCC Class A
- UL 1950
- CSA C22.2 No. 950
- EN60950
- CE
- EN55022 Class A
- EN55024

Canadian EMI Notice
This Class A digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment Regulations.

Cet appareil numerique de la classe A respecte toutes les exigences du Reglement sur le materiel brouilleur du Canada.

European Notice
Products with the CE Marking comply with both the EMC Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC)
issued by the Commission of the European Community Compliance with these directives imply conformity to the following
European Norms:

EN55022 (CISPR 22) - Radio Frequency Interference
EN61000-X - Electromagnetic Immunity
EN60950 (IEC950) - Product Safety

Five-Year Limited Warranty

MiLAN Technology warrants to the original consumer or purchaser that each of it's products,
and
all components thereof, will be free from defects in material and/or workmanship for a
period of five years from the original factory shipment date. Any warranty hereunder is
extended to the original consumer or purchaser and is not assignable.
MiLAN Technology makes no express or implied warranties including, but not limited to, any
implied warranty of merchantability or fitness for a particular purpose, except as expressly set
forth in this warranty. In no event shall MiLAN Technology be liable for incidental or
consequential damages, costs, or expenses arising out of or in connection with the
performance of the product delivered hereunder. MiLAN Technology will in no case cover
damages arising out of the product being used in a negligent fashion or manner.

Trademarks

The MiLAN logo and MiLAN Technology trademarks are registered trademarks of MiLAN Technology in the
United States and/or other countries.

To Contact MiLAN Technology

For prompt response when calling for service information, have the following information ready:
- Product serial number and revision
- Date of purchase
- Vendor or place of purchase

You can reach MiLAN Technology technical support at:

E-mail: [email protected]
Telephone: +1.408.744.2751
Fax: +1.408.744.2771
MiLAN Technology
1329 Moffett Park Drive
Sunnyvale, CA 94089
United States of America

Telephone: +1.408.744.2775
Fax: +1.408.744.2793

http://www.milan.com
[email protected]

© Copyright 2003 MiLAN Technology P/N: 90000415 Rev. A

«
1
2
3
4
...
»

Содержание MIL-SME801GLX




























































































































































Отзывы:

Нет отзывов

Похожие инструкции для MIL-SME801GLX

Бренд: Paradyne Страницы: 16

Бренд: Klark Teknik Страницы: 50

Бренд: Lancom Страницы: 25

Бренд: insys icom Страницы: 4

Бренд: ProCurve Страницы: 2

ipRocketLink 3086FR

Бренд: Patton electronics Страницы: 12

Бренд: FiberHome Страницы: 2

DotSurfer GPC-2100

Бренд: Gtran Wireless Страницы: 44

Бренд: Helmholz Страницы: 14

Edge-Core A07-ES4548C

Бренд: Atlantis Land Страницы: 2

TEG-S16R - DATA SHEETS

Бренд: TRENDnet Страницы: 12

Бренд: Allied Telesis Страницы: 44

Бренд: netsys Страницы: 243

Бренд: Suttle Страницы: 12

Бренд: TRENDnet Страницы: 2

Бренд: National Instruments Страницы: 37

BNI EIP-508 05-Z015 Series

Бренд: Balluff Страницы: 74

Бренд: ADF Web Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды