100FX MODULES
sliding it in until it stops ( See Figure 7 ). Press it firmly until you
feel the module snap into place. Never force, twist or bend the
100FX Module.
Figure 7. Install the 100FX Module by inserting it into the guides and sliding it in until it
stops
4. Gently push the thumbscrews in and turn clockwise to tighten.
Do not over tighten the thumbscrews.
5. Power the MIL-S2400 or MIL-S1600 ON. The Switch will
automatically detect the 100FX Module. Plug the fiber cable
connectors into the 100FX Module. Check the LEDs to verify
that there is a link and proper connection.
