Install Guide
Model: MIL-03F
3
Ju m p e r S e t t i n g s
The 3-pin jumper forces the device into half- or full-duplex operation.
• When pins 1 and 2 are covered, full-duplex is selected
• When pins 2 and 3 are covered, half-duplex is selected (default)
Figure 1.Inside the MIL-03F
D i ag n o s t i c L E D s a n d C o n d i t i o n s I n d i c a t e d
•
PWR
(Power): Device is receiving power.
•
TX
(Transmit): Packets are being transmitted over the network.
•
CX
(Collision): Collisions are occurring on the network.
•
RX
(Receive): Packets are being received from the network.
•
LINK
(Link): The fiber optic link is good.
DIP Switch
3-Pin jumper
(with jumper
clock installed)
