MiLAN climax 2.1, Руководство пользователя

Страница: 14 / 17

Non-NFC compatible devices
1. Press the SOURCE button repeatedly until you see ‘BT’ appear on the display.
2. When selected, the ‘BT’ text on the display will flash while the unit tries to connect to previously
paired devices. If no devices are found, the ‘BT’ text will still flash to indicate it is ready for
pairing a new device.
3. Enable the Bluetooth function on your smart phone and search for a device labeled ‘MilanDLE-
Speaker’ in the available list.
4. Select and enable pairing for the ‘Milan DLE-Speaker’ device. If prompted for a password, enter
‘0000’.
5. If pairing is successful the Sound Bar will beep and the ‘BT’ text will stop flashing.
6. If the connected device goes out of range, the Sound Bar will attempt to connect for 2 minutes.
When the device comes into range, the Sound Bar will reconnect again automatically.
To remove the paired device using only the sound Bar, press and hold the OPTION button for 3 seconds
on the remote control. The ‘BT’ text will begin
flashing again.
Bluetooth Status:
BT Solid (No Flash) Bluetooth Connected
BT Flash Trying to Reconnect/Paring Mode
NOTE:
1. The operation range of Bluetooth is approximately 10 meters (30 Feet). Any obstacles in the
path between devices may reduce this range.
2. Only one Bluetooth device can be paired at a time.
3. Not all Bluetooth devices are compatible.
Playing Music from USB Storage Devices:
Enjoy audio on a USB storage device, such as an MP3 player and USB flash memory
What you need
1. A USB storage device that is formatted for FAT file systems, and complies with the Mass Storage
Class.
2. An MP3 or WMA file on the USB storage device.