Miktek ProCast Mio, Руководство пользователя

Страница: 9 / 20

9
Installing the ProCast Mio
bit depth the more dynamic range (another way to say signal to noise ratio), which helps keep recordings
quieter. A common setting for most professional recording projects is with a sample rate at 44.1 kHz and
depth of 16 bit. Most Mac and PC based DAW’s allow you to select the bit depth and sample rate within the
program. However, you can also select them at a system level with in the Mac “Audio MIDI Setup” utility or in
the “Sound” control panel on the Windows based computers.
Selecting Sample Rates and Bit Depth on Apple-Macintosh
You can select the sample rate and bit depth in the “Audio MIDI Setup” utility located in the “Utilities” folder.
1. From the desktop select menu “GO” then, “Utilities” then, “Audio MIDI Setup” to launch the Audio MIDI
set up utility.
2. Next, set the Output sampling rates by clicking on the Miktek Mio to select the sample rate.
3. At this point you can select the bit depth using the pull down menu.
4. Now, click Apply and the new settings will be in place.