manualshive.com logo in svg

Mikrotron MC1324, Руководство пользователя

Поделиться
Скачать
Mikrotron MC1324 Скачать руководство пользователя страница 4

General 

MC132x Users Manual Rev. 0.22 

 

4 

 

alfunc-

s us-

1 General 

1.1  For customers in the U.S.A. 

This equipment has been tested and found to comply with the limits for a Class A digital device, pursu-
ant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against 
harmful interference when the equipment is operated in a commercial environment. This equipment 
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with 
the instruction manual, may cause harmful interference to radio communications. Operation of this 
equipment in a residential area is likely to cause harmful interference in which case the user will be re-
quired to correct the interference at his own expense. You are cautioned that any changes or modifica-
tions not expressly approved in this manual could void your authority to operate this equipment. The 
shielded interface cable recommended in this manual must be used with this equipment in order to 
comply with the limits for a computing device pursuant to Subpart J of Part 15 of FCC Rules. 

1.2  For customers in Canada 

This apparatus complies with the Class A limits for radio noise emissions set out in Radio Interference 
Regulations. 
 

1.3  Pour utilisateurs au Canada 

Cet appareil est conforme aux normes Classe A pour bruits radioélectriques, spécifiées dans le Règle-
ment sur le brouillage radioélectrique. 
 

1.4  Life Support Applications 

These products are not designed for use in life support appliances, devices, or systems where m
tion of these products can reasonably be expected to result in personal injury. Mikrotron customer
ing or selling these products for use in such applications do so at their own risk and agree to fully in-
demnify Mikrotron for any damages resulting from such improper use or sale. 
 

Содержание MC1324














































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды