Mikrotron MC1324, Руководство пользователя

Страница: 13 / 45

Configuration MC132x Users Manual Rev. 0.22
6.1.1 Table of commands
Syntax Range Answer Description
:a<n><xx> <n> = 1...8
<xx> = 0...ff
h
-- Set one of eight analog voltages
for the sensor
:A<n> <n> =
„y“,“Y“,“n“,“N
“
En- or disable a command ac-
knowledge or not acknowledge
(ACK or NAK)
:b<n> <n> = 0...4 -- Select baud rate:
0=9600 Bd (default setting),
1=19.2 kBd,
2=38.4 kBd, 3=56.8 kBd, 4=115.2
kBd
:c -- -- RESET and new Initialization of
the camera, new load of Pow-
erUpProfile. Duration: some sec-
onds
:e... -- -- Transmit & save a new FPGA
configuration
:f<n> <n> = 0...7 -- Reload one of eight, factory de-
fined and calibrated profiles to
PowerUpProfile.
:g<n> <n> = 0...7 -- Reload one of eight user profiles
to PowerUpProfile
:p<n> <n> = 0...7 -- Save PowerUpProfile to one of
eight user profiles, allow app. 1ms
save time.
:r<n> <n> = 1...f
h
-- Write a FPGA - register
:S 6 Byte Code -- Program sensor and pixel clock
directly.
:t<n><m> <n> = 00..7f
h
<m> = 00..ff
h
-- Short setting of X- position in
units of 10 pixel and Y-position in
units of 4 lines.
:T -- +50.5 Read temperature
:v -- #12345- V1.10-F1.29 Read serial number (#), microcon-
troller - version (V...) and FPGA -
version (F...).
:V -- 1324000003433 Read identifier
:w -- camera
profile: 44 bytes in
hex Read actual PowerUpProfile, data
output in hex
:W -- Camera
profile: 44 bytes in
ASCII
Read actual PowerUpProfile, data
output in ASCII
6.2 Read camera information
6.2.1 Read serial number and firmware revision
The serial number and the firmware revision can be read with the :v command.
Command: :v
Response(e.g.): #01234-B2.02-V2.02-F0.71
Serial number
of the camera
13
FPGA firmware version
Microcontroller bootloader Microcontroller application
firmware version firmware version