Mikrotron CoaxPress MC258 Series Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 46

Mikrotron CoaxPress MC258 Series Скачать руководство пользователя страница 28

CoaXPress MC258x Camera Manual

28

2.3.10 TriggerMode[ TriggerSelector ]

Description: This feature activates or deactivates the selected trigger type..

Access

Read / Write

Type:

Enumeration

In:

Enumeration

Description

On

This sets the camera to triggered mode. In triggered mode, the camera waits for a trigger
signal to take a picture. The trigger signal can be a (hardware) trigger signal from the frame
grabber or a software trigger initiated by a software command. If the trigger source is a
hardware or a software signal is defined by the feature 'TriggerSource'. The 'frame rate' of
the camera depends on the frequency of the trigger signals.

Off

If the trigger mode is 'Off' the camera is set to free running mode. All trigger signals gets
ignored while the camera is in this mode. The camera captures continuously images that
can be send to the frame grabber. The frame rate is defined by the feature
'AcquisitionFrameRate', the exposure time by feature 'ExposureTime'.

Out:

Remark:

The feature 'ExposureMode' defines how the camera exposes the next image as reaction to a
trigger signal. The settings of ExposureMode are only relevant if the camera is in triggered mode.

2.3.11 TriggerSource[ TriggerSelector ]

Description: This feature defines the source for the selected trigger type.

Access

Read / Write

Type:

Enumeration

In:

Enumeration

Description

SoftwareTrigger

If software is defined as the source of a trigger signal the user can trigger the camera to
take a picture by referencing the feature 'SoftwareTrigger'. It is no external (hardware) trig-
ger signal needed to request a new image from the camera.

CXPTrigger

If set to CXPTrigger, the camera waits for an external trigger signal from the frame grabber
before it makes a new image. How the image gets exposed depends on the setting of fea-
ture 'ExposureMode'.

Line0

If set to Line0 the camera waits for an external trigger signal on the CXP DIN 1.0/2.3 con-
nector to take an image. This feature is only available on Mikrotron CXP cameras with a DIN
1.0 connector.

Line1

If set to Line1 the camera waits for an external trigger signal on the CXP DIN 1.0/2.3 con-
nector to take an image. This feature is only available on Mikrotron CXP cameras with a DIN
1.0 connector.

Out:

See above

Remark:

There can always be just one trigger source active at one time.

.1.4

«
...
26
27
28
29
30
...
»

Содержание CoaxPress MC258 Series















































Отзывы:

Нет отзывов