
CoaXPress MC258x Camera Manual
10
3.2 Power supply
The camera needs a DC supply voltage between 12 … 24V at a power consumption of tbd
Watt max.
The power supply unit is connected to a dedicated connector at the back side of the camera.
Please take attention to the pin wiring of the connector as described below.
Before applying power to the camera we strongly recommend to verify the used
pins of the power connector, the polarity (+/-) of the leads and the supply voltage.
The camera may only be used with a supply voltage according to the camera
specification. Connecting a lower or higher supply voltage, AC voltage, reversal
polarity or using wrong pins of the power connector may damage the camera. If
doing so, the warranty will expire immediately.