MikroTik RouterOS v2.9, Справочное руководство

Страница: 191 / 709

• Log Management
Synchronous Interface Configuration
Home menu level: /interface cyclades
Description
You can install up to four Cyclades PC300 PCI Adapters in one PC box, if you have so many
adapter slots and IRQs available.
The Cyclades PC300/RSV Synchronous PCI Adapter comes with a V.35 cable. This cable should
work for all standard modems, which have V.35 connections. For synchronous modems, which
have a DB-25 connection, you should use a standard DB-25 cable.
Connect a communication device, e.g., a baseband modem, to the V.35 port and turn it on. The
MikroTik driver for the Cyclades Synchronous PCI Adapter allows you to unplug the V.35 cable
from one modem and plug it into another modem with a different clock speed, and you do not need
to restart the interface or router.
Property Description
name ( name ; default: cycladesN ) - descriptive interface name
mtu ( integer ; default: 1500 ) - Maximum Transmission Unit for the interface
line-protocol ( cisco-hdlc | frame-relay | sync-ppp ; default: sync-ppp ) - line protocol
media-type ( E1 | T1 | V24 | V35 | X21 ; default: V35 ) - the hardware media used for this interface
clock-rate ( integer ; default: 64000 ) - internal clock rate in bps
clock-source ( internal | external | tx-internal ; default: external ) - source clock
line-code ( AMI | B8ZS | HDB3 | NRZ ; default: B8ZS ) - for T1/E1 channels only. Line modulation
method:
• AMI - Alternate Mark Inversion
• B8ZS - Binary 8-Zero Substitution
• HDB3 - High Density Bipolar 3 Code (ITU-T)
• NRZ - Non-Return-To-Zero
framing mode ( CRC4 | D4 | ESF | Non-CRC4 | Unframed ; default: ESF ) - for T1/E1 channels
only. The frame mode:
• CRC4 - Cyclic Redundancy Check 4-bit (E1 Signaling, Europe)
• D4 - Fourth Generation Channel Bank (48 Voice Channels on 2 T-1s or 1 T-1c)
• ESF - Extended Superframe Format
• Non-CRC4 - plain Cyclic Redundancy Check
• Unframed - do not check frame integrity
line-build-out ( 0dB | 7.5dB | 15dB | 22.5dB ; default: 0 ) - for T1 channels only. Line Build Out
Signal Level.
rx-sensitivity ( long-haul | short-haul ; default: short-haul ) - for T1/E1 channels only. Numbers of
active channels (up to 32 for E1 and up to 24 for T1)
Page 177 of 695
Copyright 1999-2007, MikroTik. All rights reserved. Mikrotik, RouterOS and RouterBOARD are trademarks of Mikrotikls SIA.
Other trademarks and registred trademarks mentioned herein are properties of their respective owners.