5.
6.
7.
8.
9.
10.
1.
2.
3.
Attach provided a thick thermal pad to the card, and install the card into miniPCIe slot so that the thermal pad is between PCB and card.
Insert your desired card.
The secure card in place using previously removed two screws.
Attach the black uFL connector to the MAIN antenna connector of the modem, attach the gray cable to the DIV connector.
Attach a thinner thermal pad to the top of the card.
Reassembly in backorder.
After reassembly, slide in the SIM card from your mobile operator into the SIM slot, with the chips facing up as shown on the port label. The slot accepts Mi
croSIM (3FF).
Assembly
Attach the two legs to the LHG case by sliding them onto the respective sides, legs are different and cannot be exchanged (when looking at the
product place it that cover for Ethernet port is in front of you, leg marked R is for the right side, leg marked L is for the left side).
Snap the assembled LHG unit to the grid in the appropriate central location.
Fix the two legs in place with included two self thread screws (Phillips screwdriver PH2).
The package also contains a grounding cable connector and a 5-degree angle adapter, for easier up or downward tilt adjustment.
Mounting
