RouterBOARD Groove Series User's Manual
3
Specifications
2Hn
A‐2Hn
5Hn
A‐5Hn
CPU
AR7241 400MHz
AR7241 400MHz
AR7241 400MHz
AR7241 400MHz
Memory
32MB
64MB
32MB
64MB
Data storage
NAND chip
NAND chip
NAND chip
NAND chip
Ethernet
One 10/100 Mbit/s
Ethernet port supporting
Auto‐MDI/X
One 10/100 Mbit/s
Ethernet port supporting
Auto‐MDI/X
One 10/100 Mbit/s
Ethernet port supporting
Auto‐MDI/X
One 10/100 Mbit/s
Ethernet port supporting
Auto‐MDI/X
Wireless
Built‐in 2GHz 802.11b/g/n
1x1 MIMO, N‐male con‐
nector, CPE mode
Built‐in 2GHz 802.11b/g/n
1x1 MIMO, N‐male con‐
nector CPE or AP mode
Built‐in 5GHz 802.11a/n
1x1 MIMO, N‐male con‐
nector, CPE mode
Built‐in 5GHz 802.11a/n
1x1 MIMO, N‐male con‐
nector, CPE or AP mode
Extras
Reset switch, Beeper,
Voltage monitor, Temper‐
ature monitor
Reset switch, Beeper, Volt‐
age monitor, Temperature
monitor
Reset switch, Beeper, Volt‐
age monitor, Temperature
monitor
Reset switch, Beeper, Volt‐
age monitor, Temperature
monitor
LEDs
5 wireless signal LEDs,
ethernet activity LED
(configurable)
5 wireless signal LEDs,
ethernet activity LED (con‐
figurable)
5 wireless signal LEDs,
ethernet activity LED (con‐
figurable)
5 wireless signal LEDs,
ethernet activity LED (con‐
figurable)
Power
Passive 9‐30V PoE only.
16KV ESD protection on RF
port
Passive 9‐30V PoE only.
16KV ESD protection on RF
port
Passive 9‐30V PoE only.
16KV ESD protection on RF
port
Passive 9‐30V PoE only.
16KV ESD protection on RF
port
Dimensions
177x44x44mm, 193g.
Must be mounted with
ethernet pointing down
177x44x44mm, 193g. Must
be mounted with ethernet
pointing down
177x44x44mm, 193g. Must
be mounted with ethernet
pointing down
177x44x44mm, 193g. Must
be mounted with ethernet
pointing down
Operational Temperature
‐30C to +70C
‐30C to +70C
‐30C to +70C
‐30C to +70C
Power consumption
Up to 0,19A at 24V
(4.56W)
Up to 0,19A at 24V (4.56W)
Up to 0,19A at 24V (4.56W)
Up to 0,19A at 24V (4.56W)
RouterOS
V5, License L3
V5, License L4
V5, License L3
V5, License L4
Package contains
Groove unit, mounting loops, PoE injector, 24V power adapter
Wireless specifications
Groove 2Hn / A‐2Hn
Groove 5Hn / A‐5Hn
RX sensitivity
802.11b/g
: –92 dBm @ 6Mbps to ‐75 dBm @ 54 Mbps
802.11n
: –92 dBm @ MCS0 to –71 dBm @ MCS7 40MHz
802.11a:
–93 dBm @ 6Mbps to -77 dBm @ 54 Mbps
802.11n:
–93 dBm @ MCS0 to –71 dBm @ MCS7
TX power
802.11b/g
: 27dBm @ 6Mbps to 24dBm @ 54 Mbps
802.11n
: 27dBm @ MCS0 to 20dBm @ MCS7
802.11a
: 23dBm @ 6Mbps to 19dBm @ 54 Mbps
802.11n
: 22dBm @ MCS0 to 15dBm @ MCS7
Modulations
OFDM
: BPSK, QPSK, 16 QAM, 64QAM
DSSS
: DBPSK, DQPSK, CCK
OFDM
: BPSK, QPSK, 16 QAM, 64QAM
DSSS
: DBPSK, DQPSK, CCK
Hardware Guide
Input/Output Ports
Ethernet ports
Device is compatible with passive (non‐standard) Power over Ethernet. The board accepts voltage input from 8
to 30 V DC. It is suggested to use higher voltages for power over long cables because of better efficiency (less
power is lost in the cable itself and power supply is more efficient).
See
Connector Index
for pinout of the standard cable required for PoE. All cables made to EIA/TIA 568A/B
cable specifications will work correctly with PoE. Note that this port supports automatic cross/straight cable
correction (Auto MDI/X), so you can use either straight or cross‐over cable for connecting to other devices.