We recommend using Cat6 shielded cable for our devices.
Use a steel clamp to guide through the back of the device.
Attach to the pole and secure by tightening firmly.
Powering
The device accepts powering:
Direct input power (5.5 mm outside and 2 mm inside, female, pin positive) accept DC 9-30 V DC;
The power consumption of this device under maximum load up to 11 W.
Configuration
RouterOS includes many configuration options in addition to what is described in this document. We suggest starting here to get yourself accustomed to
the possibilities:
https://wiki.mikrotik.com/wiki/Manual:CRS3xx_series_switches
The Initial connection has to be done via the Ethernet cable, using the MikroTik Winbox utility. Winbox should be used to connect to the default IP address
of 192.168.88.1 from any port, with the username admin and no password.
For recovery purposes, it is possible to reinstall the device from the network, see the
In case the IP connection is not available, the Winbox tool (
) can also be used to connect to the MAC address of the device. Applies
only when the device has booted RouterOS.
Extension Slots and Ports
