Mikroskop Technik Rathenow RMA 5, Руководство пользователя

Страница: 5 / 24

5
1. Safety Instructions
CAUTION! Please read the following
information carefully before using the unit and its
supplementary equipment!
This unit was constructed and checked
according to the safety regulations for electronic
measuring devices, and was delivered securely.
This User Manual contains information and
warning notices that should be heeded by the
user.
The unit is a light microscope, drafted according
to the newest scientific and technical knowledge
for the visual, micro photographic and video-
technical investigation of microscopic objects.
The unit should only be used for the designed
purpose. All other uses (also the insertion of
single components which were not designed by
the manufacturer) constitute a misuse of the
product. We are not liable for any damages
caused by this misuse.
This unit is not meant for unattended continuous
operation.
The microscope does not have any special
safeguards against samples with caustic toxic,
radioactive or other hazardous materials. The
allowed sample amount may not be exceeded.
The unit may only be operated on the voltages
indicated on the unit. Please heed the
instructions in the user manual! We are not liable
for any damages caused by the disregard of
these instructions.
If the unit is connected to voltage, contact
clamps can lead to dangerous voltages and
opening the coverings or removing parts can
uncover a piece under a dangerous voltage.
The unit must be disconnected from power
before it can be opened for
adjustments,
replacements, servicing or repairs.
Existing ventilation slits should not be obstructed.
This also applies for ventilation slits on the
bottom of the unit. No tools, loose objects or
liquids should
enter the unit through ventilation
slits or other openings in the unit.
Only fuses with the required nominal current may
be used as substitutes for the prescribed use. It is
prohibited to use makeshift fuses or short-circuit
the fuse support.
If safety is endangered , the unit must be
removed from use and secured against
unattended operation. The unit should then be
sent to the production factory or a competent
service technician.
Before switching on the unit, set the controller for
the illumination intensity to the left catch in order
to prevent blinding.
1.1.
Characteristics and Application
The microscope RMA 5 is equipped with high
quality optics, and excels due to its high optical
performance.
The following additional devices are available:
evaluation of investigations over Photo-/TV
adapter and digital cameras, Polarization
equipment, measuring software...
Different interchangeable objectives and
eyepieces, which can be changed easily by a
revolver (quadruple), make an extension area in
an interval of 50x ... 640x possible (standard
configuration).