background image

14

MIGMA 200 

 

 

Instruction Manual

Device not running, no LED light

Flashing LED

Rapidly flashing LED

1  x flashing LED

2 x flashing LED

3 x flashing LED

Defective fuse

ON/OFF switch in off-state 

Lid has not been opened after switching on 
the device (with closed lid)

Lid has not been opened before further  
mixing process

Device cover not closed properly after pres-
sing start button

Device activated for more than 
recommended on-time

Overheating

Defective locking
Missing locking signal

Defective incremental decoder

Defective motor control unit

Check fuse and replace it if necessary

Activate ON/OFF switch

Lid circuit not yet activated 
Open and close the lid
 
Open and close the lid

Close cover, press start button

Let device cool down

Let device cool down

Let lock be checked by service technician

Request service technician

Replace motor and control (service techni-
cian)

10.2  Technical error

Errors are indicated by a flashing LED light on the start button. The 
error message can be reset by pressing the start button or by turning 
the device off and on. If the error continues the LED light will flash 
again. The device does only work after eliminating the error.

This part of the operating instructions is to provide assistance to tech-
ni cians of specialized dealers in particular. If an error cannot be loca-
lized by troubleshooting, a technician authorized by Mikrona or Mikro-
na’s customer service is to be commissioned for resolution.

In order to identify and examine present errors, it is necessary to open 
the device in most of the cases. Before removing the casing, you must 
disconnect the device from power supply by pulling the power plug. 
Mikrona Technologie AG does not assume liability for accidents rela-
ted to open devices. 

Cause

Solution

Error / LED signal

Flash mode:

Flash mode:

Flash mode:

Flash mode:

Flash mode:

ON 300ms / 

OFF 300ms

 

 1,6 Hz

ON 100ms / 

OFF 100ms

 

 5 Hz

ON 2000ms / 

OFF 300ms

 / ON 2000ms

ON 2000ms / 

OFF 300ms

 / ON 300ms / 

OFF 300ms

 / ON 2000ms

ON 2000ms / 

OFF 300ms

 / ON 300ms / 

OFF 300ms

 / ON 300ms / 

OFF 300ms

 / ON 2000ms

Содержание MIGMA 200

















Отзывы: