MikroElektronika
2
StartUSB for AVR
Figure 1:
StartUSB for AVR development system
How to connect the development system?
The StartUSB for AVR development system can be easily connected to a PC via a USB connector CN2, Figure 3. The
microcontroller pins can be connected to a device via 1x12 connectors CN3 and CN4. An LED labelled POWER is used
to indicate whether the board is turned on or off, whereas LEDs PD5 and PD6 can be configured to indicate the logic
state on the PD5 and PD6 pins. In order to enable programming via bootloader place jumper J3 (ENABLE BOOT) on
the board.
StartUSB for AVR
The StartUSB for AVR is a miniature development system that enables you to experiment with the AT90USB162
microcontroller.
Key features:
- Bootloader;
- Proto board;
- USB support;
- 5V power supply voltage.