Page 7
4. How To Use It?
Before using your click
™
board on your target platform, make sure to solder 1x8 male headers to both left and right side of the board.
Two 1x8 male headers are included with the board in the package.
Turn the board upside down so that
the bottom side is facing you upwards.
Place shorter pins of the header into
the appropriate soldering pads. Turn the
board upward again. Make sure to align the
headers so that they are perpendicular to
the board, then solder the pins carefully.
Now you need to train your SpeakUp to
obey your commands. Plug in the board
to your PC through USB cable. Configure
it using the free software (see page 12).
Alternatively you can configure the board
directly using the on-board buttons (see
page 24).
1. Prepare it
2. Configure it
The SpeakUp now understands your
commands. Connect relays, motors or
other electronic actuators directly to
SpeakUp’s GPIO pins. Alternatively plug
the SpeakUp into any board or shield
carrying a mikroBUS
™
socket. You can now
control your devices with your voice.
3. Use it
