mikroElektronika mikromedia PIC24, Руководство пользователя

Страница: 18 / 36

Page 18 Page 19
Figure 5-1:
Placing ICD2 connector
The microcontroller can be also programmed with ICD2 or
ICD3 programmer . These programmer is connected with
mikromedia board via
ICD2 CONNECTOR BOARD.
Programing with
ICD2 or ICD3 programmer
In order to enable the ICD2 and ICD3 programmers to be connected
to the development system, it is necessary to provide the appropriate
connector such as the
ICD2 CONNECTOR BOARD
. This connector should be
first soldered on the CN5 connector, Figure 5-1. Then you should plug in the ICD2
or ICD3 programmer into it, Figure 5-2.
Figure 5-2:
Connecting
ICD2 or ICD3
programmer