mikroElektronika mikromedia PIC24, Руководство пользователя

Страница: 16 / 36

Page 16 Page 17
The microcontroller can be programmed with
mikroProg programmer
and mikroProg Suite fo PIC software. The mikroProg programmer is
connected to the development system via the CN6 connector,
Figure 3-8.
mikroProg™
is a fast USB 2.0
programmer with mikroICD
hardware In-Circuit Debugger.
Smart engineering allows mikroProg to
support PIC10, PIC12, PIC16, PIC18, dsPIC30/33,
PIC24 and PIC32 devices in a single programmer. It
supports over 570 microcontrollers from Microchip. Outstanding
performance, easy operation and elegant design are it’s key features.
Programing with mikroProg™
programmer
Figure 3-8:
connecting
mikroProg
mikroProg Suite™ for PIC Software
mikroProg™
programmer requires
special programming software called
mikroProg Suite™ for PIC®
. This
software is used for programming
ALL of Microchip® microcontroller
families, including PIC10, PIC12,
PIC16, PIC18, dsPIC30/33, PIC24 and
PIC32. Software has intuitive interface
and
SingleClick™ programming
technology. Just by downloading the
latest version of
mikroProg Suite™
your programmer is ready to program
new devices.
mikroProg Suite™
is
updated regularly, at least four times a
year, so your programmer will be more
and more powerful with each new
release.
Figure 3-9: Main Window of mikroProg Suite for PIC programming software