LL
EE
DD
ss
LEDs
Light Emitting Diodes (LEDs) are components used for displaying pin digital state. The EasyPIC5
has 36 LEDs connected to the microcontroller PORTA, PORTB, PORTC, PORTD and PORTE.
Each group of eight port LEDs can be enabled or disabled using switches of the DIP switch SW6.
The exception is PORTE which has four LEDs and shares the same switch with PORTA.
Port LEDs are enabled when the corresponding switch of the DIP switch SW6 is ON. In this case,
LEDs will display the state of the corresponding microcontroller pin. Otherwise, the LEDs are always
off, no matter what the port state is, as no current can flow through them.
1
17
7
Figure 18
LEDs