EasyPIC
™
v7 contains three
GND pins
located in three different sections of the board,
which allow you to easily connect oscilloscope GND reference when you monitor
signals on microcontroller pins, or signals of on-board modules.
GND is located between UART module and 4-digit 7-seg display.
GND is located in the cross section between DIP18 and DIP14 sockets
GND is located between PORTD I/O group and DIP28 socket.
Additional GNDs
1
1
1
2
3
2
2
3
3
Figure 20-1:
3 oscilloscope
GND pins are
conveniently
positioned so each
part of the board
can be reached with
an oscilloscope probe
page 33
modules
