17
BIGdsPIC6 Development System
MikroElektronika
page
5HDO7LPH&ORFN57&
The DS1307 circuit enables the
BIGdsPIC6
development system to keep the real time. The real-time clock’s main features are as follows:
- providing information on seconds, minutes, hours, days, days in a week and dates including corrections for a leap year
- I
2
C serial interface
- automatic power-fail detection
- power consumption less than 500nA
The real-time clock is widely used in alarm devices, industrial controllers, mass-consumption products etc. The real-time clock provided
on the
BIGdsPIC6
development system is used to generate an interrupt at pre-set time. In order to establish connection between the
microcontroller and real-time clock it is necessary to set switches RG3, RG2 and RA15 on the DIP switch SW12 to the ON position.
)LJXUH
: Real-time clock and microcontroller connection schematic
)LJXUH
: Real-time clock
Quartz-crystal provides real-time
clock with clock signal
3V battery enables the operation
of the real-time clock when the
power supply is off
5HDOWLPHFORFNLVFRQQHFWHGWRWKHPLFURFRQWUROOHUYLD
5*5*DQG5$SLQV
