8051Flash
MikroElektronika
page
3.0.
8051Flash
Program
The
8051Flash
program is easy to use as all the options necessary for its operation are provided in a simple window which will appear
either by clicking on the
8051FLASH
icon or automatically by starting the programming process (
Build And Program
option) in one of
8051 compilers.
The options used for setting configuration bits are provided on the left side of the window, whereas the options for loading .hex file into
the programmer and microcontroller are provided on the right side of the window.
The left side of the window can be different depending on the type of the microcontroller in use and its configuration bits.
The
8051Flash
program enables a hex code, generated in some of 8051 compilers, to be loaded into the microcontroller. The hex code
should be loaded first into the programmer’s buffer by clicking the
Load
option, then into the microcontroller by clicking the
Write
option
within the programmer’s main window. The programming progress will be shown in the
Progress
bar positioned in the bottom right corner
of the same window.
The
Progress
bar shows the programming
progress expressed in a percentage
To load the program into the microcontroller,
do the following:
1
2
3
Figure 3-1:
8051Flash
program’s main window
Click the
Load
option to open the window
to select the hex code to be loaded into the
microcontroller
2
Click the
Write
option
to start programming
the microcontroller
3
Select the microcontroller to be programmed
and the
8051Flash
will automatically set
default parameters for working with the
respective microcontroller
1
