[8]
-
Default: 008
The length of the DMX frame portion that will be received by the SLAVE device can be set by using this command.
Channels beyond the received range will be disregarded. The possible valid range is from od 001 to 512.
NOTE: If the parameters of the SADR and FLEN commands are set to channel addresses beyond the received DMX
frame length, no error condition will be signaled. In this case, the SLAVE device will keep waiting for the particular
channels that are out of range.
@ITMR,XXX
-
XXX is the duration of the interrupt pulse. The possible valid range is from od 000 to 007 (100us to 1.280ms)
(1
-
Default: 001
!STORECFG
-
Stores current configuration to EEPROM
(1
!CLEARCFG
-
Clears the saved configuration from EEPROM
(1
!DISPLCFG
-
Displays all the configuration settings over the UART interface
(1
1)
See explanation in the
MASTER commands
section
