MIKOTERM mControl HT500 SET, Руководство пользователя, Страница: 5 / 18

2.4 HT500 SET RECEIVER PLACEMENT
The important thing to note in the HT500 SET receiver placement is that avoiding physical contact with boiler and protecting against
materials such as liquid, dust etc. You can place your receiver in boiler's cabinet without physical contact with boiler or mount receiver
to wall by using Receiver.
CONNECTION SCHEME
2.5 HT500 SET RECEIVER SETUP

Primarily, shut down electrical current which your boiler is connected (fuse, power outlet etc.)

Connect one of the boiler connection cable to HT500 SET receiver as shown in the Connection Scheme.

Connect other boiler connection cable end to boiler's room thermostat input as shown in the boiler's user manual.

Connect Receiver Power Cable first to receiver then plug into. If there is no plug near your boiler, you can connect cable to your
boiler's connection fuse.

After finishing connections, turn on electrical current first, then turn on your boiler.

You may see orange light blinks on the receiver by pressing for 2 seconds to manual usage button of receiver. After being sure
that your boiler is working, press same button for 2 seconds again and see orange light disappeared.

Setup your Room Thermostat to sync receiver with room thermostat.
Attention:
Only persons who have got Professional Competence should make operations electric wiring or boiler setup.
At the following link you can watch a video that describes in detail the procedure for connecting the receiver:

https://www.youtube.com/watch?v=EPZexrCDGdA

or on the Mikoterm YouTube channel which you can reach
through our site

or by loading the following QR code:
ŠEMA POVEZIVANJA