MIKOTERM mControl HT500 SET, Руководство пользователя, Страница: 10 / 18

3. THERMOSTAT CONTROL THROUGH APPLICATION
NOTE : if your mobile phone is set to Serbian and the application will be installed in Serbian. While
if your mobile is set to English or any other language, an English language application will be
installed during installation.
After the correct installation of the mC HT500 SET application, connection and synchronization,
starting the mC HT500 SET application, you will get image 1 on the phone screen. If you see
information on the phone screen that you do not have a connection to the thermostat, it means.
To activate the boiler to heat, you must increase the set temperature, which in image 1 is 19
0
C,
using the up arrow. The set temperature must be higher than the current room temperature, which
in image 1 is 22
0
C. When you increase the set temperature, the fire will start to glow orange -
image 2.
If you want the boiler to stop heating, use the down arrow to reduce the set temperature to be
lower than the current room temperature - image 1.
There are 6 operating modes:

Manual mode

Home mode

Outside mode

Sleep mode

Program mode

Location mode
Explanation of symbols:
image
1
image
2
Connection quality
Location of the thermostat that was installed during
installation
Weather forecast for the location where the thermostat is installed
The user who currently operating the thermostat
Arrow to increase the set temperature
Arrow to decrease the set temperature
Set temperature
Current room temperature
The boiler does not work (set temp. Is lower than current)
The boiler is running (set temp. Is higher than current)
Click on modes
a selection menu for operating
mode will appear - image 2.