4
5
IMPORTANT:
NOTES:
-
Please read the important safety
instructions before use.
NOTE: Make sure your local
voltage is 230V/240V~, 50Hz.
fig. 5
fig. 4
USING WITH AC POWER
USING WITH BATTERIES (not included)
1. Plug the Power Cord R into the
power supply and insert the jack
into the AC IN P socket.
See fig. 5.
1. Open the Battery Door Q .
See fig. 1
2. Insert eight new C size batteries
with the and marks correctly
aligned.
See fig. 2
3. Carefully slide the Battery Door Q
closed.
See fig. 3
Battery replacement
•
When the battery voltage drops,
there will be a reduction in
performance which might include
low sound, distortion, or failure of
the digital display to light. If this
happens, turn off the power, ensure
the unit is unplugged from the
mains and replace with a new set
of batteries.
Note on batteries:
•
Do not mix different types of
batteries or an old battery with a
new one.
•
To prevent the risk of leakage or
explosions, never recharge the
batteries, apply heat or take them
apart.
•
When not using batteries, remove
them to prevent battery drain.
•
If liquid leaks from the batteries,
throw them away. Thoroughly clean
the battery compartment with a dry
cloth.
Please make sure to set the
Function Switch
M
to "OFF"
position when unit is not in use
to conserve power.
See fig. 4.
Q
Q
R
P
M
Using with AC Power
fig. 1
Bottom View
fig. 2
fig. 3
Mains
Socket
