97
¢
3. Cautions during operation
If the product is used in excess of more than its maximum
rated permissible speed, very dangerous product
damage could occur by a large vibration.
DANGER
ò
Do not exceed the permissible rated speed
Due to the exposed rotor, touching the product during
operation may cause injury.
Make sure not to touch the product during operation.
DANGER
ò
Do not touch the product during operation.
Using the product with more than the specified
permissible transmissing torque could cause damage or
adverse effect on the equipment.
CAUTION
ò
Do not use the product with more than the
specified permissible transmission torque.
¢
4. Cautions for maintenance and inspection
¢
5. Cautions for disposal
DANGER
ò
Do not leave the product around where
young children may play.
CAUTION
ò
Call for a waste-control-collection company
for disposal.
It is extremely dangerous if the driving part starts
operating by accident while dismounting the product.
Make sure that the main power of the equipment is off.
DANGER
ò
Do not turn on the power of the equipment.
We will refuse to take responsibility as to the damaged
product that is dismantled, remodeled or repaired by
a third party except our company and the designated
company. Therefore, for the product that the assembly
process or procedure of dismantlement is described in
the manual, we will not be responsible as well. Please use
our service network for repair and dismantlement.
DANGER
ò
Do not dismantle the product.
If abnormal noises or vibrations occur during operation,
improper mounting should be considered. Do not
leave the situation as it is. It may cause damage to the
equipment itself. Also, for reasons other than above, the
belts and other screws may loosen or become defective
even if the product is mounted correctly.
CAUTION
ò
When abnormal noises or vibrations occur,
stop operation immediately.
Do not use the product in an environment where
chemicals may spill, humidity is high, or in hot or cold
temperature.
CAUTION
ò
Do not use the product in an environment
that could cause harmful effects.
Using the product when the locking part is in a slip
condition could over heat the product, which could cause
damage to the equipment.
CAUTION
ò
Do not use the product when the locing part
is in a slip condition.
Please note that this safety precautions and specification described in each
manual may be changed without prior notice.
Contact Miki Pulley for additional information or questions on these
precautions.
Using the product with more than the "ma ximum
permissible misalignment" could cause damage or
adverse effect on the equipment. Always operate the
product within the specified "maximum permissible
misalignment."
CAUTION
ò
Make sure to operate the product within the
specified “maximum permissible misalignment.”
S
af
et
y
P
re
ca
u
ti
o
n
s
Содержание COUPLINGS
Страница 3: ......
