Mikasa MT-76D, Инструкция по эксплуатации

Страница: 14 / 20

10
TEMPERATURE CLASSIFICATION OF OIL
20
°
C (+68
°
F)or over SAE 30
10
°
C(+14
°
F) - 20
°
C(+68
°
F) SAE 20
B elow1 0
°
C(+14
°
F)
CC class or high er grade
SAE 10W - 30
!
!
!
Fig.7
Fuel tank
Fuel filter
7.Service
CAUTION:
Flammable Liquid. When refueling, stop engine and
allow it to cool. Do not smoke or allow work to be
performed in the immediate area. Fire or explosion
could result from flames or sparks, or if fuel is spilled
on a hot engine.
Moving Parts. Shut down the engine before performing
service or maintenance functions.
Contact with moving parts can cause serious injury.
High Temperatures. Allow machine and engine to cool
before performing service or maintenance functions.
Contact with hot components can cause serious
burns.
7 - 1 DAILY
* Thoroughly remove dirt and oil from the engine
and control area.
* Clean or replace air cleaner as necessary.
* Check and retighten all fasteners as necessary.
* Check spring box and bellows for oil leaks.
Repair as needed.
* Remove element from pre - cleaner at the top of
crankcase(body side) and clean it by air.
7 - 2 WEEKLY(every 50 hours)
* Remove the fuel filter cap and inspect clean fuel
tank.(Fig.7)
7 - 3 Replacement of Lubricant(BODY)
* Remove the drain plug at the rea r of tamper foot
and drain dirty oil. Refill with clean oil to the
middle of the sight glass. Oil bath contains
approx. 1.7 pt. (800 cc) for MT - 76D.
INITIAL OIL CHANGE:
After 50 hours of operation
SECOND OIL CHANGE AND/OR LATER:
Every 200 hours of operation
7 - 4 Replacement of Lubricant(ENGlNE)
7 - 4 - 1 While the engine is still warm, remove the
drain plug. For quick discharging, it is
advisable to take off the oil gauge.
Replace drain plug and refill engine
crankcase.(Fig.8)
7 - 4 - 2 Refer t he following chart, for oil types.
Drain plug
Fig.8