20
1
2
3
4
Move the throttle lever to idling position.
Run the engine for 3 to 5 minutes at low
speeds to cool it down before stopping.
Move the throttle lever to the stop position to
stop the engine.
In case of a diesel engine, when the engine
stops, the buzzer sounds.(Fig.39)
When the key switch is moved from “ON(Op-
eration)” to “OFF(Stop)”, the buzzer stops.
(Fig. 40)
Shut the fuel cock.(Fig. 41)
(Only for YANMAR engine)
Stop position
Throttle lever
Handle
Idling position
Fig.39
Fig.40
CAUTION
If the throttle lever is moved from the idling
position to the stop position, the engine revo-
lution decreases. Before the engine stops
completely, do not move the throttle lever sud-
denly to the idling or operation position.
Engine failure might occur.
9
䠊
STOPPING THE MACHINE
Move the throttle lever to idling position.
Run the engine for 3 to 5 minutes at low
speeds to cool it down before stopping.
In case of MVH-308GH/408GH:
Turn the engine switch to the OFF position,
then the engine stops. (Fig. 36)
In case of MVH-508GHS:
Turn the key to "STOP" position. (Fig.37)
Shut the fuel cock.
(Fig. 38)
1
2
3
4
Fig.36
Gasoline Engine
Fig.41
YANMAR
(L70N,L100N)
“Close”
Fuel cock lever
Fig.37
Diesel Engine
Fig. 38
Fuel cock lever
“Close”
HONDA
(GX270,GX390)
