Mikasa 450125, Руководство по эксплуатации

Страница: 23 / 30

Check frequency Check parts Check items Oils
Appearance
Fuel tank
Fuel system
Engine oil
Shock absorber
Hand pump
Vibrator oil
Hydraulic pipe system
Air cleaner
Guard frame
Back and forth motion
lever, linking parts
Back and forth motion
lever operation
Bolts and nuts
Engine oil
Engine oil filter
Engine oil
Engine oil filter
Vibrator oil
Hydraulic oil
Battery terminal
V-belt for vibrator
Clutch
Vibrator oil
Hydraulic oil
Fuel filter
Engine oil filter
Fuel pipes
Air cleaner element
Hydraulic hose
Daily
(before starting)
Every 20 hours
Every 100 hours
Every 200 hours
Every 300 hours
Every 2 years
Irregular
Flaw, deformation
Leakage
Leakage
Leakage, oil level, dirt
Crack, damage, wear
Leakage
Leakage
Leakage, looseness, flaw, wear
Dust on sponge
Breakage, flaw, loosened or
missing bolts and nuts
Missing, breakage, flaw, looseness or
missing bolts and nuts
Operation check, play
Looseness, missing
Replace only after the first 20 hours
Replace only after the first 20 hours
Change
Washing
Leakage, oil level, dirt
Leakage, oil level, dirt
Cleaning
Flaw, tension
Dirt, flaw, wear
Change
Change
Change
Change
Change
Change
Change
gasoline
Engine oil
Hydraulic oil
Engine oil
Hydraulic oil
Engine oil
Engine oil
Engine oil
Hydraulic oil
Engine oil
Hydraulic oil
6mm 8mm 10mm 12mm 14mm 16mm 18mm 20mm
4T (SS41) 70 150 300 500 750 1,100 1,400 2,000
6-8T (S45C)
100 250 500 800 1,300 2,000 2,700 3,800
11T (SCM3)
150 400 800 1,200 2,000 2,900 4,200 5,600
When the mating material is aluminum
100 300
䡚
350 650
䡚
700
Thread diameter
Material
(Bolts used on the machine are right-hand thread.)
12-1. Inspection and Maintenance Schedule Table
12. Regular Check and Adjustment
For details about the check and maintenance of the engine, please refer to the
attached engine operation manual.
Caution: The above table shows the check frequency for standard condition. The
check frequency may vary depending on the condition in which the machine is used.
For check of bolt and nut looseness and tightening, please see the following tighten-
ing torque list.
Tightening Torque List (unit: kgf-cm, 1kgf-cm=9.80665N-cm)
19