Mikado LOGO 10, Руководство пользователя

Страница: 57 / 64

Manual LOGO 10 Page 57 ©Mikado Modellhubschrauber
���
���
16 Rotor Blades
Balancing of Rotor Blades (Cen-
ter of Gravity)
Place each rotor blade over an
edge as shown in picture (1). Adjust
the blades so that they are in equilib-
rium. If the center of gravity is not in
the same place in each blade, this
needs to be corrected using tape.
Apply as much tape as necessary
until both blades show their center of
gravity in the same place.
Static balancing
Screw the rotor blades together as
shown in picture (2). The rotor bla-
des are properly balanced when they
are suspended exactly horizontally.
If one of the rotorblades is not exact-
ly horizontal, the blades are not in
equilibrium.
This is corrected by applying tape
to lighter blade.
When mounting the rotor blades to
the blade holders, note the proper di-
rection (clockwise rotation). Tighten
the cap screws holding the rotor bla-
des, so that the blades cannot move
easily in the blade holders.