3D production system ► Make a better world
7
2 Setting up your 3D Printer- Hardware
2.1 Unpacking
2.2 Connecting to the Power adapter and Cable
(1) Connect the power cord and adapter to your device, and then plug it into an electrical outlet
(2) Connect your printer with laptop
-
Basic : Connect printer and laptop by RJ-45 cable (Graph1.) [Initiating time 1 minute ]
-
LAN : Connect both printer and laptop to local area network [Initiating time a few seconds ]
-
IP sharer : Connect both printer and laptop to IP sharer [Initiating time a few seconds ]
WARNING
The MiiCraft weighs 37.5kg. Do not attempt to unpack or move the MiiCraft
without assistance. Always use proper lifting techniques to avoid injury.
(1) Remove the top
cardboard
(2) Remove the EPE
surround the inner box
(3) Remove the side cardboard
(4) Remove the inner box
Network port
ARJ-45
cable
Graph1.
