MIHM-VOGT MV-R 100/120, Руководство по эксплуатации

Страница: 14 / 30

Page 14 MV-R 100/120 Version 1.0de - 09/2019
Installation
Installation
Setup
The MV-R 100/120 is designed as a table-top unit. A level surface of at
least 50 cm x 60 cm that supports a load of up to 80 kg is recommended to
ensure stability.
Setup conditions
► Always set up the MV-R 100/120 in dry rooms that are as dust-free as
possible, and make sure that liquids cannot penetrate the unit.
► Highly flammable and combustible gases and liquids must not be
stored in the installation rooms.
► Do not place any combustible and flammable objects near the
MV-R 100/120 .
► Keep a distance of 50 mm around the
MV-R 100/120
for sufficient
cooling.
Caution
Risk of ignition!
The floor covering may ignite due to a hot product dish shattering.
h
Be mindful of flammable surfaces for the floor covering.
Caution
Tipping loads!
Supporting surface with an insufficient load-bearing capacity.
When setting up the MV-R 100/120 , make sure that the supporting
surface has a sufficient load-bearing capacity .
Caution
Risk of injury due to oven weight!
Physical strain/back injuries due to the high inherent weight.
h
Have at least two persons carry/move the MV-R 100/120 together
(max. 30 kg load bearing capacity/person).
Caution
Risk of overheating!
Overheating due to blocked air inlets.
h
Make sure that the air vents remain clear on all sides.