If the electrodes are not moistened correctly, the pulses cannot be
transmitted correctly. If the electrodes are moved, always moisten
them again.
Personnel:
n
Athlete/Patient
n
Trainer
1.
Have an i-body
®
of the correct size ready for use
2.
Spray the i-body
®
with water until a visible film of water has
formed on the electrodes (Fig. 34).
3.
Put on the i-body
®
.
Close the “fitting aid” (hook and loop in the area of the
chest and abdomen) in accordance with Fig. 35.
Moistening and applying electrodes
Preparing the i-body
®
Fig. 34: Moistening the i-body
®
Putting on the i-body
®
Fig. 35: Wearing the i-body
®
Before the training
2021-07-28
miha-bodytec m.ove EMS training device
76